-
Opel Manta i200Genuine manta i200, baremetal respray including blasted engine bay, also fitted was a nice and warm 2.2 CIH engine. Once dismantaled, The car required quite an amount of body restoration too. This was a rebuild which turned out to be real challenge, it had to retain it originality and come in on a very tight […]
-
Carls 16V KadettCarl called me and asked me what I would recommend for an engine conversion for his Kadett. The XE was the only choice, along with a set of SBD throttlebodies and MBE engine management. A modified Manta RWD manifold was employed and heat rapped. A 2″ twin box system finish of the exhaust system. The […]
-
Adrian Cox’s V8 hatchWe started with a twin turbo 2.0 LET. We came up with this unique engine set up which was primarily designed to look different from the norm, however, when it came to setting it up we had problems. After much deliberation, we decided to remove it and go the V8 route. Once the engine choice was made, […]
-
Opel Manta V8 A SeriesSimon Owen wanted a v8 in his beautiful blue A Series.He just wanted the rumble that only a V8 can provide. A near stock Rover was the engine of choice. Makes around 180 BHP.
-
Ford Cortina MK3 2.0 GTMajor restoration
-
Opel Manta TurboGarry Croft brought his A Series in to have a Calibra turbo motor installed. The engine bay was stripped out, repainted and the new engine went in. With over 200 BHP, new brakes were required. 280mm vented discs are fitting along with wilwood four pots. They look too through the spokes of Garry’s lovely 17″ […]
-
Dave Smiths mint, stock B SeriesDave brought his Manta in for a few body repairs, mainly around the wings but also under his vinyl roof. This needed removing along with the headlining. Once it was removed, all the repairs were carried out, along with a new bespoked headlining and new vinyl roof. The headling and the vinyl roof were both made […]